Accessori

PCA - 1270

Carrucola singola

pca-1270 0The corner block lets you change the line pull direction of a log to avoid obstacles or to position it parallel to the trail. The corner block is therefore very useful with an ATV (QUAD) or our Portable WinchTM to get some lift on the rope or to double your line (and power). Use it with the pulley facing down for best results since it will prevent the rope from jumping out of the block when there is a slack and will jump easier of it when used in combination with the automatic release (PCA-1291).

 

CARATTERISTICHE
Applicazioniforestale, caccia, off road
Peso2,4 kg
Diametro100 mm
Lunghezza25 cm
Larghezza10 cm
Diametro max fune13 mm
Diametro min fune6 mm
Materialeacciaio zincato

 

PCA-1271

pca-1271 0Carrucola autobloccante in alluminio con flange rotanti

The self-locking pulley is especially designed for rescue operations. It features a brake cam system which allows the rope to go through freely in one direction and blocks it in the other direction. The spring-loaded cam can be disengaged by pulling a release cord. The 62 mm (2-1/2'') diameter aluminum pulley is mounted on self-lubricating bushing and stainless steel axle. The swing sides are also made of anodized aluminum.

 

CARATTERISTICHE
ApplicazioniCavo, filo, installazione in fibra ottica, cantiere, agricoltura, forestale, apparecchi di sollevamento, caccia, applicazioni marine, Off road, ricerca e salvataggio, tenda, lavori in altezza
Peso655 g
Diametro62 mm
Lunghezza22,5 cm
Larghezza8,5 cm
Altezza4,5 cm
massima resistenza alla rottura4000 kg
Diametro max fune13 mm
Diametro min fune10 mm
Materialealluminio anodizzato
Garanzia1 anno

 

PCA-1272

Carrucola autobloccante doppia in alluminio con flange rotanti

pca-1272 0The self-locking pulley is especially designed for rescue operations. It features a brake cam system which allows the rope to go through freely in one direction and blocks it in the other direction. The spring-loaded cam can be disengaged by pulling a release cord. When used in a system (with a matching double pulley), it provides 4:1 mechanical advantage. Both 62 mm (2-1/2'') diameter aluminum pulleys are mounted on self-lubricating bushings and stainless steel axles. The swing sides and the main plate are also made of anodized aluminum.

 

CARATTERISTICHE
ApplicazioniCavo, filo, installazione in fibra ottica, cantiere, agricoltura, forestale, apparecchi di sollevamento, caccia, applicazioni marine, Off road, ricerca e salvataggio, tenda, lavori in altezza
Peso920 g
Diametro62 mm
Lunghezza22,5 cm
Larghezza8,5 cm
Altezza7 cm
massima resistenza alla rottura4000 kg
Diametro max fune13 mm
Diametro min fune10 mm
Materialealluminio anodizzato
Garanzia1 anno

PCA-1273

Carrucola doppia con flange rotanti in acciaio inox

PCA-1273

For extra heavy loads, you can multiply the winches’ power using pulleys. This double pulley features the same aluminum and stainless steel construction as our stainless steel swing side snatch block (PCA-1274) but with two 100 mm (4'') diameter deep groove aluminum sheaves. Using one double pulley (positioned at the load) with a single pulley, you can triple the pulling power of the winches. With two double pulleys, an amazing 4 tons of force can be exerted on a load (using the PCW5000)!

 

CARATTERISTICHE
ApplicazioniCavo, filo, installazione in fibra ottica, cantiere, agricoltura, forestale, apparecchi di sollevamento, caccia, applicazioni marine, Off road, ricerca e salvataggio, tenda, lavori in altezza
Peso1,9 kg
Diametro100 mm
Lunghezza23 cm
Larghezza11 cm
Altezza8,5 cm
massima resistenza alla rottura4400 kg
Diametro max fune13 mm
Diametro min fune6 mm
MaterialeAlluminio e acciaio inox
Garanzia1 anno

PCA-1274

Carrucola singola con flangerotanti in acciaio inox                                  

PCA-1274

The swing-side snatch block features a lightweight 100 mm (4'') diameter deep groove aluminum sheave, with stainless steel plates that swing open to install rope. Sintered bronze bushing on stainless steel shaft provides 98% efficiency. Particularly useful for use when doubling the line, the rope cannot accidentally come out of the block. Use the steel locking carabiners or shackles to anchor to a polyester sling.

 

CARATTERISTICHE
ApplicazioniCavo, filo, installazione in fibra ottica, cantiere, agricoltura, forestale, apparecchi di sollevamento, caccia, applicazioni marine, Off road, ricerca e salvataggio, tenda, lavori in altezza
Peso1,1 g
Diametro100 mm
Lunghezza22 cm
Larghezza11 cm
Altezza5,5 cm
massima resistenza alla rottura2200 kg
Diametro max fune13 mm
Diametro min fune6 mm
MaterialeAlluminio e acciaio inox
Garanzia1 anno

 

PCA - 1275

pca-1275 0Carrucola singola

Smaller and lighter than the PCA-1274 pulley, this swing-side snatch block features a lightweight diameter deep groove aluminum sheave, with stainless steel plates that swing open to install rope. Useful to deviate the load or to double the line. Ideal to use with the PCW3000.

CARATTERISTICHE
ApplicazioniCavo, filo, installazione in fibra ottica, cantiere, agricoltura, forestale, apparecchi di sollevamento, caccia, applicazioni marine, Off road, ricerca e salvataggio, tenda, lavori in altezza
Peso560 g
Diametro76 mm
Lunghezza15 cm
Larghezza8 cm
Altezza3 cm
massima resistenza alla rottura1600 kg
Diametro max fune10 mm
Diametro min fune6 mm
Materialeacciaio inossidabile
Garanzia1 anno

 

Richiesta

Insieme troveremo la soluzione giusta per le sue esigenze.


Acconsento all'utilizzo delle informazioni di cui sopra nel modulo, ai fini della scrittura e della notifica elettronica della nostra offerta. Terpin S.r.l. si impegna a gestire i dati in modo responsabile e a non trasmetterli a nessuno.

In conformità con l'articolo 73 di ZVOP-1, la informiamo sui suoi diritti: Un individuo può in qualsiasi momento richiedere per iscritto o in altro modo concordato che il responsabile del trattamento dei dati personali cessi permanentemente o temporaneamente di utilizzare i suoi dati personali a fini di marketing diretto. Il responsabile del trattamento dei dati personali è tenuto a prevenire adeguatamente l'uso dei dati personali a fini di marketing diretto entro 15 giorni e a informare l'interessato per iscritto.